OUR PRODUCTS · PATENTED THREE-PHASE PLASMA
Two products. One plasma core.
Patented plasma technologies that address the technical and environmental requirements of a low-carbon industry: electric high-temperature heat, and clean hydrogen with solid carbon from (bio)methane.
3,000°C+
Arc temperature
also pressurised, up to 6 barg
>90%
Thermal efficiency
measured on our three-phase torches
0 kg CO₂
Direct emissions
(bio)methane pyrolysis, no combustion
30 kW – 2 MW
Power range
one torch design, every project phase
OUR PRODUCTS
Choose the product. The plasma is the same.
Plasma Torch
Clean power for industry: electric high-temperature heat that integrates into existing furnaces and reactors.
- Temperatures above 3,000°C
- Thermal efficiency above 90%
- 30 kW to 2 MW, continuous and pressurised operation
HyPlasma® Tech
Clean production of hydrogen and carbon black: modular turnkey units fed with (bio)methane, with no direct CO₂.
- 100 kW containerised unit · 2 MW plant
- Natural gas, biogas or flare gas, 1–6 barg
- Up to 3× less electricity than electrolysis
WHAT IS PLASMA
The fourth state of matter, put to work.
Plasma is often referred to as the fourth state of matter. When a gas is heated to sufficiently high temperatures, it becomes ionised and transitions into a plasma state, where charged particles make the medium electrically conductive — yet the medium stays electrically neutral overall. The sun, lightning and electric arc discharges are all plasmas.
Thermal plasma induces three physical effects at once: thermal, chemical and hydrodynamic. Our three-phase torch is built to use all three.
Thermal effect
Arc temperatures above 3,000°C deliver electric heat for melting, cracking and high-temperature processes.
Chemical effect
The ionised gas drives reactions without oxygen — the basis of methane pyrolysis into hydrogen and solid carbon.
Hydrodynamic effect
The moving three-phase arc stirs and mixes the gas stream, so the whole flow sees the plasma.
WHICH ONE FOR YOUR PROCESS?
Heat, or hydrogen and carbon.
Plasma Torch — when you need combustion-free heat
Replace a burner with an electric arc: furnaces, kilns, gasifiers, vitrification. Compatible with specialty and neutral gases, dusty or hot feedstock, 1–6 barg.
Sectors: heavy industries, waste treatment.
HyPlasma — when you need hydrogen and carbon
A turnkey unit that converts (bio)methane into hydrogen and solid carbon in one step, with no direct CO₂. Available as a containerised 100 kW unit or a 2 MW plant.
Sectors: hydrogen production, carbon production.
SECTORS
Where 3,000°C of electric heat pays off.
Hydrogen production
Low-carbon H₂ on site, from the gas you already have.
Carbon production
Solid carbon as a product, not an emission.
Heavy industries
Electric high-temperature heat for steel, aluminium and cement.
Waste treatment
Plasma temperatures for gasification and vitrification.
Services
Test your gas on the 100 kW pilot
Measured yields and carbon grades before you commit to a plant.
About us
The team behind the torch
A plasma engineering team in Sophia-Antipolis since 2018.